All about the marine separator and its parts!
A Marine separator is a powerful machine when it’s about to control water pollution. It is the tool that helps in the separation of the liquids according to their density. Marine separator spare parts aid in the hassle-free functioning of the separator. The Marine separator is an essential tool on the ship.
- Main Engine
- Auxiliary Engine/Generator
- Engine Spares
- Propeller
- Hydraulics
- Pumps & Spares
- Oil Purifier & Spares
- Heat Exchanger
- Air Compressors & Spares
- Turbo Chargers& Spares
- Winch
- Navigation and Safety Equipment’s
- Boilers
- Cranes
- Anchors & Chains
The prime purpose of using the marine separator-
See, ships use diesel as a fuel and it requires dust-free and high-quality diesel. It removes the dust particles from the oil and makes it suitable to be used on the ship. You will find it on every vessel. Marine separator spare parts make the functioning of the separator unhindered.
There are primarily two types of separators/centrifuges-
- Purifier
- Clarifier
A purifier is used when you need to separate the water from the oil and a clarifier is used when you need to remove only pollutants. Also, little amount of water is removed in the process.
Let’s talk about the principle of working of High-Speed Centrifuge on Ship-
The principle of difference in the specific gravity of different liquids is used. The heavier liquid i.e. water gets down at the bottom and lighter liquids i.e. oil comes up. That’s how the ship gets the purified oil and runs smoothly.
Components of the best quality marine separator-
Vertical shaft– It is made up of an alloy of steel. This marine separator spare part is used for transforming the electrical motor output to rotate the bowl at good speed via spur gear and belt.
Main framework– It supports the whole internal parts of the system. The major parts of the internal separator are outlet line connections, bowl, water and feed lines, disk parts, and others.
Clutch: This is installed on the horizontal shaft to avoid the overload of the electric motor.
Bowls-Made up of high-tension stainless steel. Bowls of the marine separator are used to discharge the accumulated sludge and have the space for retaining the separated sludge.
Gear pump and belt drive– These are other vital spare parts of the separator. The belt drive is ideal to transmit the rotational motion to the bowl.
Spur gear– Used for transferring the rotational motion, the spur gear is put between the shafts.
Reviews
There are no reviews yet.